Description
- Custom duct kit for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening).
- Includes Remote Display/Control Unit, Bottle Probe, and 50′ of Duct
Required for use in moderate or high humidity environments.- Attaches easily to the front of 3200/4200 VS and 3000S/4000S Split refrigeration systems
- Provides access to cooling unit control panel and switches
- Designed for easy hook-up to 8″ ducting
- One or both openings may be ducted (total of 100 equivalent feet)
- Bottle probe with 10′ cord plugs into face of the cooling unit
- Maintains accurate temperatures inside the wine cellar
- Includes our remote control display kit.
Configurations
Please refer to the following resources before purchasing this kit:
This duct hood is required when the cooling unit will be installed in unconditioned environments, subject to the limitations listed in our Low RH vs High RH Duct Kit Chart. In some cases, the conditions are too extreme for any of our cold-side duct kits.
Use our ducting heat loss table and our duct correction table to correctly adjust the sizing of your cooling unit, because ducting will add to the thermal load of the cellar.
Refer to our Bottle Probe Operating Instructions to correctly set the cooling unit depending on how you’re using the Bottle Probe
Specs & Resources
Brand: CellarPro
Size: 14 1/4w x 4 3/4d x 27 1/2h (in)
Weight: 45 lbs
Capacity: 100 Equivalent Feet
Warranty:
1 Year
Click on one of the following links for more information:
- Front Duct Hood Cut Sheet
- Framing Diagram
- Installation Diagrams
- Installation Instructions 3000S / 4000S
- Installation Instructions 3200VS / 4200VS
- Split Systems As Ducted
- 3200VS / 4200VS As Ducted
Features
Custom duct KIT for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Insulated ducting (2 x 25′) is included.
- Attaches easily to the front of 3200/4200 VS and 3000S/4000S Split refrigeration systems
- Appropriate for Unconditioned / High-humidity environments
- Provides access to cooling unit control panel and switches
- Designed for easy hook-up to insulated 8″ ducting (included)
- Both openings must be ducted (total of 100 equivalent feet) to/from the cellar
- Maintains accurate temperatures inside the wine cellar
- Includes our remote thermostat bottle probe (measures air or liquid temperatures)
- Includes our remote control display kit