cellarpro 1800, 1800, cellarpro 1800xts, 1800 cooling, cooling unit, small cooling unit for wine cabinet, 1800 series, wine cellar cooling unit small, smalls elf contained wine cooling unit, small wine cooling unit, small wine cellar cooling units, self containd wine cellar cooling unit, cellarpro 1800 qtl
CellarPro Self Contained 1/4 Ton 1800XTS-HE Cooling Unit #37164 - Image 2
CellarPro Self Contained 1/4 Ton 1800XTS-HE Cooling Unit #37164 - Image 3
CellarPro Self Contained 1/4 Ton 1800XTS-HE Cooling Unit #37164 - Image 4

CellarPro Self Contained 1/4 Ton 1800XTS-HE Cooling Unit #37164

$2,295.00

  • 1925  BTU/h
  • Dimensions: Width 18″ , Depth 16″ 1/2, Height 10″ 1/2h
  • A Self Contained, Through The Wall cooling Unit
SKU CPRO-37164 Categories , ,

CellarPro 1800XTS-HE wine cooling units deliver 1925 BTUH total / 1602 BTUH sensible capacity at 55F, providing 1/4-ton cooling for small wine cellars up to 400 cubic feet using standard sizing assumptions (no glass, 85F ambient and R-19 insulation throughout).* Built to deliver maximum cooling power in its class, the 1800XTS-HE features a powerful low-GWP compressor, upgraded EC fans, longer-lasting Aluminum coils and robust components engineered for demanding installs where condenser air ranges from 40F to 95F. This upgraded unit delivers strong cooling performance with lower energy usage and reduced environmental impact, plus adjustable humidity control to protect corks and labels.

*Deviation from these assumptions should be evaluated using our online Wine Cellar Cooling Calculator.

Key Benefits

  • High-performance cooling: 1925 total / 1602 sensible BTUH @ 55F for optimal temperature and humidity management
  • Low-GWP system: R-290 refrigerant with ultra-low GWP and zero-ODP 
  • EC fan technology: lower energy usage and more powerful airflow  
  • Longer coil life: Aluminum evaporator coils to help resist formicary corrosion and support longer service life
  • Adjustable humidity control: Helps protect cork integrity and wine labels
  • Compact design: provides the same footprint and produces the most BTUH in its class 

Performance Overview

  • Setpoint range: 47F–62F (cellar temperature)
  • Designed to maintain ideal cellar conditions: Helps maintain humidity levels that support cork and label protection
  • Best fit: Small wine cellars requiring 1/4-ton cooling power using standard sizing assumptions*
  • On the cold side, this unit intakes from the front and exhausts from the bottom (thus the front 8 inches of the cooling unit must be inside the cellar.)
  • The 1800XTS-HE requires fresh air intake at the rear of the cooling unit. If sufficient space does not exist to provide sufficient airflow to the rear of the cooling unit, you may need a rear duct kit.
  • 1800 Series cooling units can be installed completely inside the wine cellar when used with our rear duct kit, which allows you to duct the supply and return airflows from the rear of the cooling unit up to 100 equivalent feet (50 feet per duct).
  • Please note: The cold side of the 1800 Series cooling units cannot be ducted, and the hot side can be ducted with 6-inch ducting (no reductions) plus auxiliary fan support, which is included with our our rear duct kit.
  • You must located this unit within the cellar, with the following exception: these units can be installed directly above the wine cellar when used with our front intake hood.
  • For installation in environments below 40F, our compressor heater modification is required.
  • For installation in environments below 20F down to -20F, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater.
  • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.
  • R-290 Compressor: delivers higher BTUH with lower energy use and environmentally friendly refrigerant.
  • Now with coated aluminum evaporator coils, which are not subject to formicary corrosion, the leading cause of cooling unit failure
  • Energy-efficient components (compressor and EC Fans on both the cold and hot sides), save $57.75 in annual energy costs (assumes 75% runtime and $0.15/kWh)
  • This unit offers a choice of top or rear hot exhaust. If the unit’s location does not provide sufficient room for airflow, you may need to purchase a rear duct kit.
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended moisture level inside your cellar.
  • Extra-large coils generate maximum cooling power.
  • The intuitive LED display panel mounted on the evaporator with a digital programmable thermostat is simple and easy to use. A remote thermostat is available as an upgrade.
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
  • Temperature set point range is 47F to 62F when the cooling unit is sized correctly.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors.
  • Audible and visual alarms and maintenance-needed indicators protect the cooling unit and the wine cellar.
  • 8-foot power cord exits from the rear and plugs into standard 110V receptacles.
  • A standard dedicated 15-amp circuit is required to power the unit.
  • A 3-amp electric receptacle is provided to run a small lamp.
  • Removable steel case provides access to the internal components for servicing and repair.
  • CellarPro’s 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
  • An optional Enhanced Warranty (#1835) is available for additional protection.
  • ETL Tested and Certified to rigorous UL Standards for safety.
  •  

1925 TOTAL / 1602 SENSIBLE BTUH @ 55F. 
CellarPro 1800XTS-HE Cooling Unit (P/N 37164). The 1800XTS-HE is built to deliver maximum cooling power in its class, providing 1/4-ton cooling for small wine cellars up to 400 cubic feet under standard sizing assumptions (no glass, 85F ambient and R-19 insulation throughout). With an R-290 compressor, EC fans and aluminum evaporator coils, it delivers powerful performance with efficient airflow, reduced environmental impact and energy-saving components.

CellarPro engineered the 1800XTS-HE for customers who want the most cooling capacity in a compact, cellar-friendly footprint. With a wide 47F–62F setpoint range and adjustable humidity control, it helps protect cork integrity and wine labels in properly designed wine cellars.

All air-cooled refrigeration equipment requires a source of fresh air to dissipate heat. The fresh air intake must come from outside the wine cellar and cannot be drawn from the cellar space.

Designed for indoor use only, 1800XTS-HE units can operate in ambient conditions from 40F to 95F out of the box with a plug-in design. For operation in colder environments, see the Options & Upgrades tab for recommended modifications.

Brand: CellarPro

UPC: 077757371646

Size: 18w x 16 1/2d x 10 1/2h (in)

Weight: 60 lbs

Power/Rating:
115V AC / 60 Hz
Compressor Amps:
– Running: 4.5 Amps
– Startup: 29.8 Amps
– Total Watts: 300
– Requires: Dedicated 15-Amp Circuit
– Recommended: Surge Protector
Decibels: 54 dBA (Rear)

Cold Temperature

  • Compressor Heater #1727: protects the unit when installed in environments that drop below 40F down to 20F.
  • Fan Cycling Switch HE #37131: supports the unit in temperatures below 20F down to -20F (self-contained and split systems with electronic control) when combined with our compressor heater.

Filters & Grills

  • Use our filter & grill guide to find the cooling unit filter or duct filter and/or duct grill that is appropriate for your cooling unit.

Maintenance

  • Refer to filter replacements in the previous section.
  • Evap Fresh #17984: Should be sprayed on the evaporator (cold-side) coils once a quarter, especially when the evaporator coils frequently have condensation, to extend the life of the evaporator coils and to reduce the growth of mold in the drain pan.
  • Condenser Brush #1475: With a long handle and stiff bristles, the brush is ideal for cleaning off the dust and dirt that collect on the hot-side condenser coils, especially when a filter isn’t used on the coils.

Remote Control & Probe

  • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
  • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
  • Bottle Probe Extension Cords available in 25-foot (#1780) and 50-foot (#1781) lengths.

Other Options & Upgrades

  • Condensate Drain Line: strongly recommended for wine cellar installations (but not required for wine cabinets), a drain line allows excess moisture to drain from the bottom (#7431) or rear (#1606) of the cooling unit.
  • Condensate Drain Line plus Heating Element: combined with a drain line, we add a 100W heating element to burn of excess moisture. Available with bottom (#7432) or rear (#1709) drain lines.
  • Power Cord Modification #1098: normally the cord exits from the rear of the cooling unit, which generally is outside the cellar; this modification moves the cord to the front of the cooling unit, so that it can be plugged into an outlet inside the cellar.
  • Mounting Clips #1095: attached to the front of CellarPro 1800 Series cooling units, these clips are designed to be bolted to the ceiling inside the wine cabinet / cellar.

Sizing Table: Click here to view sizing table

Warranty Resources
– Warranty Overview
– Limited Warranty – 5 Years (Entire System)
– Optional Extended Warranty (sold separately).

Call Us 800-323-3130

Related products