Call Us 📞 800-323-3130

Mon–Fri 8am–6pm CST, Sat–Sun 9am–1pm CST

Free design consultations

Showrooms in Miami & Fort Lauderdale

WhisperKool Phantom 3500 – Fully Ducted

$6,265.00

WhisperKOOL Phantom 3500 Fully Ducted Cooling System is intended to be installed in an attic or a utility room adjacent to the cellar.

WhisperKOOL Phantom 3500 Fully Ducted Cooling System is intended to be installed in an attic or a utility room adjacent to the cellar. This system uses WhisperKOOL’s liquid-temperature-measuring bottle probe. By monitoring liquid temperature instead of air temperature, the bottle probe ensures that your wine cellar maintains optimal wine-aging conditions. This WhisperKOOL Phantom 3500 can be ordered with our 24-volt thermostat conversion kit. The Phantom combines sleek, modern design with quietness, customizable installation options, and proven performance.

  • Proven cooling performance
  • Liquid-temperature-measuring bottle probe
  • Quiet operation
  • Optional UV Light Air Purification System
  • Numerous ducting options
  • Remote KDT Plus controller/thermostat
  • Quick-to-access components for ease of maintenance
  • Corrosion-resistant drip tray
  • Black powder-coated paint scheme
  • Suitable for operation in ambient temperatures as high as 110°F

BTU/H RATING

4060

The BTU/h value range shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.) which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature.

Cellar Size:
800 cu. ft.* (Each wine cellar is unique and has specific cooling requirements. Heat load calculations should always be performed prior to selecting a cooling unit. See our Cellar Wizard.)
BTUh w/85°F:
4060
CFM:
326 with blowers in top orientation;
312 with blowers in side orientation
Dimensions:
15.75”H x 15.75”W x 37”L (without duct plenums);
22.75” H x 15.75” W x 48”L (duct plenums on top of unit);
15.75” H x 22.75” W x 48”L (duct plenums on side of unit)
Refrigerant:
R-134a
HP:
1/4
Voltage Rating:
115V (20-amp dedicated circuit required)
Weight:
115 lbs.
AMPS:
6 (running)
Duct Size:
10” Return • 8” Supply (evaporator & condenser)
Drain Line:
1/2″ ID clear plastic tubing
Installation:
Unit is installed in an attic or utility room. Max. duct length is 50 combined feet for evap and condenser sides (25-ft. supply and 25-ft. return) with a maximum of three bends per side.
Temp. Delta:
55°F temperature differential between cellar environment and condensing unit intake air.
Thermostat:
Remote digital display with 50-ft. cable and 50-ft. liquid-temperature-measuring bottle probe
Warranty:
Two-year limited warranty (parts and labor)

Call Us 800-323-3130