CellarPro 8200VSi VS Cooling Units. CellarPro made the 8200VSi – VS Cooling Units to provide maximum cooling power and adjustable humidity control. For cellars up to 2,200 cubic feet. Made for internal installations. 8200VSi Self Contained Wine Cooling System are built with high-output Tecumseh rotary compressors and oversized coils.
For maximum performance in high-temperature environments up to 115°F. These Wine Cooling System also feature variable-speed fans with a low setting for quieter operation when conditions permit.
- This VS Cooling Units can operate in extreme temperature conditions (-20 to 115°F). If the unit’s location does not provide sufficient room for airflow. You may need to purchase a rear duct kit.
- Dual high-output centrifugal fans come with variable speed settings for your choice of maximum cooling power at the high fan speed. Or quieter operation (66 decibels) at the low fan speed.
- Adjustable humidity control combines a high-output compressor with flexible fan cycles. In order to maintain a essential level of moisture inside your cellar.
6438 BTUH @ 55°F.
CellarPro’s 8200VSi cooling units (1 Ton Nominal) are suitable for wine cellars up to 2,200 cubic feet in both commercial and residential wine cellars. The 2,200 cubic feet cellar size assumes that the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete), the cooling unit is not ducted, a setpoint of 55°F inside the cellar and ambient temperatures up to 85°F outside the cellar.
Performance testing shows that this unit maintains optimal cellar temperature and humidity conditions in extreme conditions up to 115°F more effectively than similar units from competing brands. 8200VSi units also are significantly quieter than comparable units from other brands.
Brand: CellarPro
UPC: 077757147869
Size: 16 1/10w x 28d x 22h (in)
Weight: 162 lbs
Power/Rating:
115V AC / 60 Hz
Compressor Amps:
– Common dedicated 15-amp circuit is essential to power the unit.
– Startup: 48.3 Amps
– Unit Amp Rating: 9.7 Amps (high fan speed)
– Total Watts with Low Fan: 862
– Total Watts with Evaporator Off / Low Fan: 862
BTUH @ 55F / Decibels:
– Low Fan Speed: 6254 / 57 dBA
– High Fan Speed: 6438 / 59 dBA
– 1 Ton Nominal
Compatible with 15-Amp Dedicated Circuit
Warranty Resources
– Warranty Overview
Click on one of the following links for more information:
Cold Temperature
- Compressor Heater #1727: protects the unit when installed in environments that drop below 40F down to 20F.
- Fan Cycling Switch #6972: supports the unit in temperatures below 20F. And as low as -20F when combined with our compressor heater.
Duct Hoods
- Duct Hoods (Cold Side) (#16667 for low-humidity environments or #16668 for high-humidity environments). And Kits (#14680 for low-humidity environments or #15088 for high-humidity environments). They permit the cooling unit to be located remotely. Up to 50 equivalent feet away from the cellar using 10″ diameter ducting.
- Duct Hood (Hot Side)#19090 and Kit #15092: allows you to install the unit completely inside your cellar or in a small space. With limited airflow, up to 100 equivalent feet (50 feet per duct) using 8″ diameter ducting.
- Duct Kits are the same as Duct Hoods, and also include 2 x 25-feet of insulated (R-6) flex ducting.
Filters & Grills
- Use our filter & grill guide to find the cooling unit filter. Or duct filter and/or duct grill that is appropriate for your cooling unit.
Remote Thermostats, Displays & Probes
- Networkable Thermostats #27346 and #27310: connect your cooling unit to a networkable, wi-fi enabled thermostat (sold separately). You must order it at the same time that the equipment is ordered. Other limitations apply – read the networkable thermostat description for more information. Includes 10 feet of wiring.
- Remote Display #1603: lets you place the digital panel wherever you want. Whether inside or outside the cellar. Includes 10 feet of wiring.
- Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit. And allows it to monitor air or liquid temperatures at various locations inside the cellar.
- Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths.
DID YOU KNOW?
Nobody protects your wine cellar better than CellarPro Cooling Systems. In the event your cooling unit fails and the failed components are covered by our warranty. We’ll send a replacement cooling unit to you per the terms of our Replacement Unit Program
CellarPro Replacement Unit Program
If your CellarPro VS Cooling Units fails and the parts that fail are still covered by warranty. We’ll send a replacement cooling unit to you, as follows:
- Your cooling unit must be registered at CellarPro.
- Your cooling unit is of accurate size, installed and maintained.
- Your cooling unit may not have been permanently modified, damaged or disfigured.
Please note:
- Replacement units are factory-refurbished cooling units with a similar build date as your original unit.
- You are responsible for the shipping cost to send the replacement unit to you. And return the original unit to us and the cost. (if any) to remove the original unit and install the replacement unit
- In order to send a replacement unit, we require a deposit. Which will be refunded minus shipping costs. Upon the return and pending the inspection of the original unit
- If the original unit fails due to improper installation or use. Such failure is not covered by warranty. And we will deduct the cost of the repairs from the refund of your deposit
