April 15, 2025
No Comments
$12,625.00 – $13,760.00
Applications:
• Wine Zone Ducted Split are used for L-shaped rooms, long narrow rooms. Or where one point source will not properly circulate air throughout the room.
• Wine Zone Split systems are ideal for cellars that will store or mature wine for long periods of time.
• Located outside the cellar, the supply and return air is ducted into the room similar to a central air conditioner.
• No visible mechanical equipment in cellar.
• Wine Zone Split Ducted units need only supply registers and return air grilles in the cellar leaving more wall space for racking and art work.
• Ducting can be placed in soffits if room construction is already complete.
• The most quiet style of all refrigeration systems.
• Humidification, and dehumidification air handler systems allow for total climate control in the wine cellar.
• Accurate, fast acting thermostat controls the refrigeration system and all accessories.
• Can be used with either an indoor or outdoor remote condensing unit, moving heat and noise away from the cellar.
• Wooden and decorative metal registers available.
• Must be installed and adjusted by a qualified HVAC technician.
Air Handler WZAH4800a:
• ETLC listed air handler in accordance with UL1995.
• Phenolic coated, aluminum fin-copper tube evaporator coil.
• Factory balanced, forward curve direct drive blower, with 115V, 3 speed, PSC motor.
• Cabinet with fully insulated 3/4″ fiberglass with an R value of 3.26.
• 1″ disposable filters standard on all units.
• Vertical units have duct connections on return air inlet and a large blower access panel in front.
• Horizontal units have 3/8″ NC thread nuts in each corner of top panel for easy suspension and are designed for top or bottom. blower access.
Air Handler WZAH6200a and WZAH9000a:
• ETL listed and AHRI certified.
• All-aluminum evaporator coil.
• 230 volt, direct drive, multi-speed ECM blower motor.
• Foil faced insulation with glue-less cabinet retention.
• 1″ disposable filters standard on all units.
• Multi-position air handler.
Features
One thermostat controls Cool, Humidify, Dehumidify, and Heat
• Blue touchscreen is large, easy to read, and user friendly.
• System configuration, while extensive, is easy and fast to perform.
• The wiring connections use common designations familiar to HVAC techs making installation of control wiring faster and simpler.
• No 115-volt power circuit is required at the thermostat reducing installation cost
• Humidify and Dehumidify are more economical since there is no need for additional controls
• Remote temperature sensor allows user to view the temperature from outside the cellar.
• Customers that purchase Dehumidification also receive the ability to heat the cellar. The Heat option with the modified condenser control panel is no longer necessary
• Provides control of Fan to customer.
• Can be used as a direct replacement for WZDS thermostats
Indoor condenser:
• UL listed Copeland® commercial condensing unit.
• Uses R-134a refrigerant.
• Air-cooled units standard.
• Receiver for use with thermostatic expansion valve.
• 4″ galvanized iron base.
• Variable speed fan control.
• Crankcase heater on all models.
Outdoor Condenser:
• UL listed Copeland® commercial condensing unit.
• Uses R134a refrigerant.
• Air-cooled units standard.
• Receiver for use with thermostatic expansion valve.
• Rainproof control panel box with liquid-tight conduit on the control panel.
• Low ambient controls.
• Variable speed fan control.
• Crankcase heater on all models.
Outdoor Enclosure:
• UL Listed enclosure.
• Galvanized steel base.
• 20 GA. Galvanized steel cabinet.
• Hinged access for easier servicing.
• Wind safety latch.
• All-season weather protection.
• Front louvers at a 45° angle.
• Rain trough under hinge to catch moisture that might seep through hinge.
• Condenser screen protected with high-temperature baked-on clear lacquer coating.
9000
The BTU/h value shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.)
Which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature.
Peco Performance PRO Thermostat:
The Performance PROT12000 Series is intended for use in residential and commercial environments. It can support the 1 stage Heat/1 stage Cool/Humidify/Dehumidify configurations for WineZone air handler systems. It features a 12 square inch blue backlit display with dynamic menus. That can be accessed using touchscreen keys. All Performance Pro T12000 Series offer the following standard features: Auto-changeover, temporary override, optional remote temperature sensors, keypad lockout, and filter change reminder.
Humidification:
Research Products Corporation is the largest manufacturer of whole house humidifiers, air cleaners, and fresh air exchangers and is a recognized leader in the heating and air conditioning industry.
• Quiet, efficient performance
• Easily installed and maintained
• Fan draws air through water panel where humidity is generated and the air handler distributes humidity throughout the cellar
• .75 gal/hr capacity, among the highest of all evaporative humidifiers
• Could humidify a 4000 sq. ft. home
• Simple yearly maintenance can be done by the HVAC tech while performing the yearly maintenance on the refrigeration system
• Fast, easy replacement of inexpensive water panel and orifice
Dehumidification for WZAH4800a:
• Duct heater suitable use in any forced air system
• Suitable for zero clearance installations in vertical or horizontal duct systems
• Easily installed in the side of the supply air duct
• Heavy gauge galvanized iron construction
• Output matched in size to refrigeration unit
Dehumidification for WZAH6200a and WZAH9000a:
• Cabinet installed electric heater kit
• Factory installed if purchased with the unit
• Rust-resistant nickel chromium for the MBVC’s heat elements, improving the unit’s longevity and performance.
• Features a plug-in wiring harness
Condenser:
Voltage Ampacity Max. Fuse Min. Wire Size RLA/LRA dB
230/208-60-1 11.4 15 12-2 w/Gr 8.0/46.0 58
➢ Uses 5/16” x 3/4” line set up to 150 equivalent feet. Uses 3/8” x 7/8” line set from 151 to 200 equivalent feet maximum.
➢ Unit is not precharged and must be evacuated
➢ For use with R-134a refrigerant.
➢ Indoor condensers must be installed in a room with a minimum of 1240 cubic feet of free space
➢ Dimensions:
Indoor Unit: 28” L x 24.5” W x 20.25” T 130 lbs.
Outdoor Unit: 27” L x 24.5” W x 22” T 160 lbs.
Multi-Position Air Handler:
Voltage HP Ampacity Max. Fuse Min.Wire Size Filter dB
240/208-60-1 3/4 5.8 15 14-2 w/Gr 16 x 20 x 1 48
➢ Multi positon unit.
➢ Requires dedicated circuit from fuse panel. Ampacity, max. fuse, and wire size will change if
dehumidification is used. See dehumidification below
➢ 600 CFM required. 8 x 16 supply trunk, 8 x 18 return trunk recommended, 2” duct wrap min.
➢ 3/4” FPT drain, trap required
➢ Dimensions: Weight
Unit: 17.5” W x 21” D x 53.5” H 110 lbs.
Supply opening: 11.25” x 16.375”
Thermostat:
➢ PRO 1 or Peco 12532 if ordered with humidifier
➢ 18-gauge 5-wire to the condenser
Humidifier:
➢ Requires 115 volt receptacle
➢ 24 volt control from condenser
Dehumidification:
➢ To be installed in air handler.
➢ 25 amp breaker required at air handler for 240 volt use, 20 amp breaker required at air handler for 208
volt use.
➢ Heater draws 12.5 amps at 240 volts, 10.8 amps at 208 volts
Approximate Shipping Weight: 425-510 lbs.
Crate Size: 32” x 84” x 48” T
Showroom Available By Appointment
Established 2014 Copyright ©2024 Cool Wine Cellar. All Rights Reserved