CellarPro 6000S-EC Ductless Split System Cooling Unit #1764

$6,195.00

  • 5046 BTU/h
  • Condensing Unit Dimensions:    
    – Width 13 7/8″ , Depth 18 7/8″ , Height 11 7/8″Evaporator Unit Dimensions:      
    – Width 30 3/8″ , Depth  14 3/8″ , Height 13 1/4″
  • Ideal for Internal installations for residential and commercial cellars
  • A Ductless Split Wine Cooling Unit
SKU CPRO-1764 Categories , , Tags , ,

CellarPro 6000S Cooling Unit (3/4 Ton Nominal). CellarPro made the 6000S Split Wine Cooling System. In order to provide maximum cooling power and adjustable humidity control for cellars up to 1,500 cubic feet. Split Wine Cooling System separate the evaporator from the condensing unit. Thus allowing the noise and heat from the condensing unit to be located away from interior living areas.

Configurable for internal or external installations. The 6000S includes a variable-speed fan on the evaporator with a low setting for quieter operation and a high setting for maximum power.

  • This Split Wine Cooling System is made to separate the heat and noise from the condensing unit from interior living spaces, and can be configured to operate indoors or outdoors in extreme temperature conditions ranging from -20 to 110°F.
  • Our Evaporators are built with high-output centrifugal fans which include variable speed settings for your choice of maximum cooling power at the high fan speed, or quieter operation (53.7 decibels) at the low fan speed.
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
  • CellarPro 6000S  units are made to be installed with the evaporator inside the cellar. And the condensing unit in a remote location.
  • Our Split refrigeration systems offer a choice of wiring:
    1. The Condensing unit can be electronically controlled by and wired to the Evaporator. (single power source on the Evaporator side). This configuration allows the Condensing unit to be used in temperatures down to 20F with the addition of our compressor heater. Or down to -20F with the addition of our fan cycling switch AND compressor heater.
    2. This configuration requires a 15-amp dedicated circuit breaker for 3000S and 4000S systems. And a 25-amp dedicated circuit breaker for 6000S-EC and 8000S systems.
  • CellarPro 6000S evaporators cannot be ducted from a remote location and must be located inside the cellar.
  • When the control panel is difficult to access. We offer a remote control display kit which is wired to the cooling unit. And allows the digital display to be mounted inside or outside the cellar.
  • The condensing unit requires 12 inches of unobstructed space in front of the coils. And requires approx. 600-700 CFM of ventilation when installed in a confined space.
  • For outdoor installations, we offer an outdoor hood to protect the condensing unit from weather. All outdoor hoods include a compressor heater.
  • The evaporator should never be put to temperatures below 32F.
  • Access to the left and right side of the evaporator unit is required for installation.
  • All split systems must be installed and charged on site by a qualified HVAC professional. Line-set equivalent feet must be calculated in accordance with ASHRAE guidelines. Which refers to our Line Sizing Chart for more information.
  • A CellarPro 6000S cooling unit must always be used in the upright position. And should never be operated on its side or upside down.
  • We ship these units strapped to a pallet via common carrier with curbside delivery. Inside delivery is available for an additional charge.
  • To activate your warranty, you must complete and return our Installation Checklist.
  • Now with energy-efficient EC Fans on the cold side, save $107.42 in annual energy costs vs AC fans (assumes 75% runtime and $0.15/kWh)
  • This CellarPro 6000S  is designed to separate the heat and noise from the condensing unit from interior living spaces. And these units can operate indoors or outdoors in extreme temperature conditions ranging from -20 to 110F.
  • Our Evaporators are built with high-output centrifugal fans which include variable speed settings. For your choice of maximum cooling power at the high fan speed. Or quieter operation (53.7 decibels) at the low fan speed.
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
  • Extra-large coils generate maximum cooling power inside the cellar.
  • Excess condensate is run through a 1/2″ drain line that exits from a choice of knockouts in the evaporator.
  • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
  • Intuitive LED display panel mounted on the evaporator with digital programmable thermostat. Which is simple and easy to use. Remote thermostat is available as an upgrade.
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
  • Temperature set point range is 47F to 62F when the cooling unit is properly sized.
  • CellarPro 6000S operates with minimal vibrations and less noise than comparable units from competitors.
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • Common dedicated 20-amp circuit (valve control) or 25-amp circuit (electronic control) is required to power the unit.
  • Adjustable mounting brackets are included as standard equipment. And multiple knockouts and access points ensure easy installation.
  • Factory-installed Expansion Valve and Liquid Line Solenoid Valve (optional) ensure maximum operating precision and range.
  • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
  • Sight Glass and Liquid Line Filter/Drier are included for easy installation and maintenance.
  • Oversized Receiver allows for long line sets up to 100 equivalent feet and up to 30 vertical feet.
  • Auto-reset high-pressure switch protects the system by interrupting power to the compressor when system pressure is too high.
  • Evaporator and Condensing Unit are factory-pressurized and shipped with dry nitrogen to ensure leak-free installation.
  • CellarPro 2-Year/5-Year Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
  • An optional Extended Warranty (P/N 7528) is available for additional protection.
  • ETL Tested and Certified to rigorous UL Standards for safety.

5046 SENSIBLE BTUH @ 55F.
CellarPro’s 6000S-EC cooling units (1/2 Ton Nominal) are engineered for wine cellars up to 1,500* cubic feet in both commercial and residential wine cellars.

Performance testing shows that this unit maintains optimal cellar temperature and humidity conditions in extreme conditions up to 110F more effectively than similar units from competing brands. 6000S-EC units use energy-efficient EC fans in the evaporator and are significantly quieter than comparable units from other brands. Visit our Learning Center for data tables, performance charts and product comparisons among different brands.

*Assuming R19 insulation throughout the cellar, 55F inside the cellar and 85F outside the cellar. Cold-side ducting, glass and/or uninsulated walls, extreme humidity, altitude and other factors may affect the sizing calculation.

Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).

Please note: Our units were not designed for, and our warranty does not cover damage from, marine exposure (within 5 miles of the ocean). In these environments, you will need an applied coating, such as Insitu®, to protect outdoor components against corrosion that is common in coastal regions.

Brand: CellarPro

UPC: 077757017643

Size: 30 3/8w x 14 3/8d x 13 1/4h (in)

Weight: 185 lbs

Power/Rating:
115V AC / 60 Hz

Condensing Unit Dimensions:
– 54 lbs
– 13.9w x 18.9d x 11.9h
Evaporator Unit Dimensions:
– 68 lbs
– 30.4w x 14.4d x 13.2h

System Amps:
-Common dedicated 20-amp circuit (valve control) or 25-amp circuit (electronic control) is necessary to power the unit.
– Startup: 53.0 Amps
– Unit Amp Rating: 12.6 Amps (high fan speed)

BTUH @ 55F / Evaporator Decibels
– Low Fan Speed: 4311 / 54 dbA
– Med Fan Speed: 4880 / 58 dbA
– High Fan Speed: 5046 / 66 dbA
– 3/4 Ton Nominal
Condensing Unit Decibels
– Indoor: 65
– Outdoor: 63

Capacity: 5046 BTUH @ 55F

Material: Metal

Warranty:
To activate your warranty, you must complete and return our Split Installation Checklist.
Warranty Overview

Click on one of the following links for more information:

WARNING - This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Cold Temperature

  • Compressor Heater #35605: protects the unit when installed in environments that drop below 40F down to 20F. Included
  • Fan Cycling Switch #6972: supports the unit in temperatures below 20F and as low as -20F when combined with our compressor heater.


Hoods


Filters & Grills

  • Use our filter & grill guide to find the cooling unit filter. Or duct filter and/or duct grill that is appropriate for your cooling unit.


Remote Thermostats, Displays & Probes

  • Networkable Thermostats #27346 and #27310: connect your cooling unit to a networkable, wi-fi enabled thermostat (sold separately). Must be ordered at the same time that the equipment is ordered. Other limitations apply. Please read the networkable thermostat description for more information. Includes 10 feet of wiring.
  • Remote Display #1603: lets you place the digital panel wherever you want. Whether inside or outside the cellar. Includes 10 feet of wiring.
  • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the evaporator. And allows it to monitor air or liquid temperatures at various locations inside the cellar.
  • Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths.

DID YOU KNOW?
Nobody protects your wine cellar better than CellarPro Cooling Systems! In the event your cooling unit fails and the failed components are covered by our warranty. We’ll send a replacement cooling unit to you per the terms of our Replacement Unit Program

CellarPro Replacement Unit Program
If your CellarPro cooling unit fails and the parts that failed are still covered by warranty. We’ll send a replacement cooling unit to you, as follows:

  1. Your cooling unit must be registered at CellarPro
  2. Your cooling unit must have been properly sized, installed and maintained
  3. Your cooling unit may not have been permanently modified, damaged or disfigured

Please note:

  • Replacement units are factory-refurbished cooling units with a similar build date as your original unit
  • You are responsible for the shipping cost to send the replacement unit to you and return the original unit to us, and the cost (if any) to remove the original unit and install the replacement unit
  • In order to send a replacement unit, we require a deposit, which will be refunded minus shipping costs upon the return and pending the inspection of the original unit
  • If the original unit failed due to improper intallation or use, the failure is not covered by warranty and we will deduct the cost of the repairs from the refund of your deposit

Call Us 800-323-3130

Wine cellar Cooling Guide

Related products

  • self contained units, through the wall, self contained unit, self contained cooling unit, self contained cooling system, wine cellar cooling units self contained,cellarpro, cellar pro, cellarpro 1800, cellarpro cooling systems, wine cellar cooling units, cellarpro wine cooler, cellarpro cooling unit, wine cellar pro, cellarpro cooling units, wine room cooler, cellar coolers,

    CellarPro 6200VSi-ECX Through The Wall Cooling Unit 14679

    $4,895.00     Add to cart
  • CellarPro 4200VSi 220V Through The Wall Cooling Unit #1512

    CellarPro 4200VSi 220V Through The Wall Cooling Unit #1512

    $4,595.00     Add to cart
  • CellarPro 4000S-EC Ductless Split System Cooling Unit #1763

    CellarPro 4000S-EC Ductless Split System Cooling Unit #1763

    $4,995.00     Select options This product has multiple variants. The options may be chosen on the product page
  • cellarpro 1800, 1800, cellarpro 1800xts, 1800 cooling, cooling unit, small cooling unit for wine cabinet, 1800 series, wine cellar cooling unit small, smalls elf contained wine cooling unit, small wine cooling unit, small wine cellar cooling units, self containd wine cellar cooling unit, cellarpro 1800 qtl

    CellarPro 1800QT-ECX Through The Wall Cooling Unit #1084

    $1,850.00     Select options This product has multiple variants. The options may be chosen on the product page

At Cool Wine Cellar For 10 years, we have been helping people all over the world create wine cellars that are perfect for their needs.

Facebook Instagram Pinterest Twitter Linkedin

Navigation

Shop

Stay In Touch

Showroom Available By Appointment

Schedule Appointment

Established 2014    Copyright ©2024 Cool Wine Cellar. All Rights Reserved