cellarpro 1800, 1800, cellarpro 1800xts, 1800 cooling, cooling unit, small cooling unit for wine cabinet, 1800 series, wine cellar cooling unit small, smalls elf contained wine cooling unit, small wine cooling unit, small wine cellar cooling units, self containd wine cellar cooling unit, cellarpro 1800 qtl
CellarPro 1800QT-HE Cooling Unit 1/6 Ton #37130 - Image 2
CellarPro 1800QT-HE Cooling Unit 1/6 Ton #37130 - Image 3
CellarPro 1800QT-HE Cooling Unit 1/6 Ton #37130 - Image 4

CellarPro 1800QT-HE Cooling Unit 1/6 Ton #37130

$2,095.00

  • 1420  BTU/h
  • Dimensions: Width 18″ , Depth 16″ 1/2, Height 10″ 1/2h
  • A Self Contained, Through The Wall cooling Unit
SKU CPRO-37130 Categories , ,

CellarPro 1800QT-HE wine cooling units deliver 1420 BTUH total / 1170 BTUH sensible capacity at 55F, making it one of the most efficient 1/6-ton cooling systems for small wine cellars and wine cabinets. Built with low-GWP R-290 refrigerant, high-efficiency EC fans and aluminum evaporator coils, this unit delivers quiet operation, strong airflow, and stable temperature and humidity control when installed in a properly constructed cellar.

Key Benefits

  • High-performance cooling: 1420 total / 1170 sensible BTUH @ 55F for optimal temperature and humidity management
  • Low-GWP refrigerant: R-290 refrigerant with ultra-low GWP and zero ODP
  • Quiet, efficient airflow: EC fan technology for reduced noise and improved airflow efficiency
  • Longer coil life: Aluminum evaporator coils to help resist formicary corrosion and support longer service life
  • Adjustable humidity control: Helps protect cork integrity and wine labels
  • Compact design: Ideal for tight cabinet installs and small cellar environments
  • On the hot side, this unit intakes from the rear, and offers a choice of top or rear hot exhaust.
  • On the cold side, this unit intakes from the front and exhausts from the bottom (thus the front 8 inches of the cooling unit must be inside the cellar.)
  • The 1800QT-HE requires fresh air intake at the rear of the cooling unit. If sufficient space does not exist to provide sufficient airflow to the rear of the cooling unit, you may need a rear duct kit.
  • 1800 Series cooling units can be installed completely inside the wine cellar when used with our rear duct kit, which allows you to duct the supply and return airflows from the rear of the cooling unit up to 100 equivalent feet (50 feet per duct).
  • Please note: The cold side of the 1800 Series cooling units cannot be ducted, and the hot side can be ducted with 6-inch ducting (no reductions) plus auxiliary fan support, which is included with our our rear duct kit.
  • You must located this unit within the cellar, with the following exception: these units can be installed directly above the wine cellar when used with our front intake hood.
  • For installation in environments below 40F, our compressor heater modification is required.
  • For installation in environments below 20F down to -20F, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater.
  • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.
 
  • R-290 Compressor: delivers higher BTUH with lower energy use and environmentally friendly refrigerant.
  • Coated aluminum evaporator coils resist formicary corrosion, the leading cause of cooling unit failure
  • Energy-efficient components (compressor and EC Fans on both the cold and hot sides), save $41.69 in annual energy costs (assumes 75% runtime and $0.15/kWh)
  • Configurable exhaust: top or rear hot-side exhaust. If clearance is tight, use our rear duct kit (sold separately) to ensure proper airflow.
  • Adjustable humidity control uses high-output compressor and flexible fan cycles to help maintain recommended cellar moisture.
  • Extra-large heat-exchange coils deliver powerful cooling capacity.
  • Intuitive controls: LED display with a digital programmable thermostat. Remote display is available as an upgrade.
  • Convenience modes: Energy Saver, Quick Chill and Auto-Defrost 
  • Set point range:  51F to 62F when properly sized.
  • Low vibrations and quiet operation compared to typical units in this class.
  • Audible and visual alarms to safeguard the unit and the cellar.
  • Power: 8-foot cord exits from the rear and plugs into a standard 110V grounded receptacle.
  • Circuit: requires a dedicated 15-amp circuit. 
  • Convenience Outlet: integrated 3-amp electric receptacle for a small lamp.
  • Serviceability: removable steel case for easy access to internal components.

  • Warranty: backed by CellarPro’s 5-Year Standard Warranty.

    An optional Enhanced Warranty (#1835) is available for additional protection.

  • Safety: ETL listed to rigorous UL Standards.

1420 BTUH total / 1170 Sensible BTUH at 55F.
CellarPro 1800QT-HE Cooling Units (P/N 37130) deliver powerful, quiet cooling for wine cabinets and small wine cellars located near living areas. Now engineered with R-290 refrigerant, EC fans and aluminum evaporator coils, this 1/6-ton system provides higher efficiency, improved airflow and dependable performance.

Designed as a direct replacement for CellarPro 1800QTL and 1800QT, the 1800QT-HE offers precise temperature and humidity control for properly constructed wine cellars.

All air-cooled refrigeration equipment requires a source of fresh air to dissipate heat. The fresh air intake must come from outside the wine cellar and cannot be drawn from the cellar space.

Designed for indoor use only, 1800QT-HE units can operate in ambient conditions from 40F to 95F out of the box with a plug-in design. For operation in colder environments, see the Options & Upgrades tab for recommended modifications.

 

Brand: CellarPro

UPC: 077757371301

Size: 18w x 16 1/2d x 10 1/2h (in)

Weight: 60 lbs

Power/Rating:
115V AC / 60 Hz
Compressor Amps:
– Running: 2.8 Amps
– Startup: 20.5 Amps
– Total Watts: 232
– Requires: Dedicated 15-Amp Circuit
– Recommended: Surge Protector
Decibels: 45 dBA (Rear)

Cold Temperature

  • Compressor Heater #1727: protects the unit when installed in environments that drop below 40F down to 20F.
  • Fan Cycling Switch HE #37131: supports the unit in temperatures below 20F down to -20F (self-contained and split systems with electronic control) when combined with our compressor heater.


Filters & Grills

  • Use our filter & grill guide to find the cooling unit filter or duct filter and/or duct grill that is appropriate for your cooling unit.

Maintenance

  • Refer to filter replacements in the previous section.
  • Evap Fresh #17984: Should be sprayed on the evaporator (cold-side) coils once a quarter, especially when the evaporator coils frequently have condensation, to extend the life of the evaporator coils and to reduce the growth of mold in the drain pan.
  • Condenser Brush #1475: With a long handle and stiff bristles, the brush is ideal for cleaning off the dust and dirt that collect on the hot-side condenser coils, especially when a filter isn’t used on the coils.

Remote Control & Probe

  • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
  • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
  • Bottle Probe Extension Cords available in 25-foot (#1780) and 50-foot (#1781) lengths.

Other Options & Upgrades

  • Condensate Drain Line: strongly recommended for wine cellar installations (but not required for wine cabinets), a drain line allows excess moisture to drain from the bottom (#7431) or rear (#1606) of the cooling unit.
  • Condensate Drain Line plus Heating Element: combined with a drain line, we add a 100W heating element to burn of excess moisture. Available with bottom (#7432) or rear (#1709) drain lines.
  • Power Cord Modification #1098: normally the cord exits from the rear of the cooling unit, which generally is outside the cellar; this modification moves the cord to the front of the cooling unit, so that it can be plugged into an outlet inside the cellar.
  • Mounting Clips #1095: attached to the front of CellarPro 1800 Series cooling units, these clips are designed to be bolted to the ceiling inside the wine cabinet / cellar.

Warranty Resources
– Warranty Overview
– Limited Warranty – 5 Years (Entire System)
– Optional Extended Warranty (sold separately).

Call Us 800-323-3130

Related products