CellarPro 3400H Houdini Duct KIT HOT SIDE (P/N 36027). These duct kits are designed for use with CellarPro’s 3400H Houdini cooling unit, as follows:

• Attach to the hot side airflows (intake and exhaust), allowing the cooling unit to push its exhaust and/or pull its fresh air from remote locations (but not from the cellar), mitigating tight installations with insufficient space around the cooling unit, as follows:
  • Fresh air intake: can be ducted from the top (shown), the front, or the right side of the cooling unit
  • Hot air exhaust: can be ducted from the top (shown), the front, or the rear of the cooling unit

Each bundle includes:

• 2 hoods (1 for intake and 1 for exhaust on the hot side)
• 2 insulated flex ducts (25′ each)

Please note:

• 2 x 25-foot R-6 insulated ducting is included with this bundle
• Ducting must be 8-inch diameter or equivalent from start to finish
• The high fan speed MUST be used when ducting our cooling unit.
• The maximum length of ducting is 100 equivalent feet on the hot side and 100 equivalent feet on the cold side.
• The hot side can be ducted up to 200 equivalent feet with the addition of an inline duct fan (sold as a separate kit.)