CellarPro 1800H Houdini Duct KIT (Hot Side) with Inline Fan (P/N 30352). These duct kits are designed exclusively for the hot side of CellarPro’s 1800H Houdini cooling unit, as follows:

• Attach to the hot side airflows (intake and exhaust), allowing the cooling unit to push its exhaust and/or pull its fresh air from remote locations (but not from the cellar), mitigating tight installations with insufficient space around the cooling unit, as follows:
  • Fresh air intake: can be ducted from the top (shown) or the right side of the cooling unit
  • Hot air exhaust: can be ducted from the top (shown) or the rear of the cooling unit

Each bundle includes:

• 2 hoods (1 for intake and 1 for exhaust, both on the hot side)
• 2 insulated flex ducts (25′ each)
• 1 inline fan with wiring for switched-power

Please note:

• 2 x 25-foot R-6 insulated ducting is included with this bundle
• Ducting must be 6-inch diameter or equivalent from start to finish
• The duct hoods MUST be used for the hot side; the cold side CANNOT be ducted with a fan

The maximum length of ducting is 100 equivalent feet with the fan.