$995.00
Shipping $85.00
CellarPro 6200 / 8200 VS Duct HOOD (Cold Side) Low RH RETROFIT. Duct openings are designed to attach to two 10-inch ducts for evaporator intake and exhaust. Custom design allows access to controls and switches on the face of the cooling unit.
The exhaust exits from the top, and the intake returns from the front.
Shown at left: front duct hood (right) AND rear duct kit (left). The rear duct kit must be purchased separately.
Hood includes: Duct hood, remove display, and bottle probe. Ducting is not included. When purchasing ducting, it must be 10″ diameter and at least R6 insulation.
The high fan speed setting is required when using our front duct hood.
Please note: This kit is recommended for low humidity, conditioned environments.Please use our high humidity duct kit if the system will be used in a warm, high humidity or unconditioned environment.
Be sure to refer to our ducting heat loss table and our duct correction table when sizing the cooling unit.
Brand: CellarPro
Size: 16 1/4w x 39 3/4d x 29 h (in)
Weight: 35 lbs
Capacity: 100 Equivalent Feet
Warranty:
1 Year
Click on one of the following links for more information:
Custom duct hood RETROFIT for CellarPro 6200/8200VS cooling units. With this kit, the cold air intake and exhaust each can be ducted up to 100 equivalent feet (50 feet per opening).
Not recommended for use in high humidity environments. Please use our high-humidity duct retrofit kit if the system will be used in a warm, moderate , unconditioned or high humidity environment.
Established 2014 Copyright ©2023 Cool Wine Cellar. All Rights Reserved